Sorry to back track, but A frames. Overpriced, i'd say. My one cost £30, maybe less to make. Yes, i agree they are close to the law and you can't reverse with them. :roll: But they do a job :lol: http://i268.photobucket.com/albums/jj37/russy196/Green%20SJ%20Van/Red%20One/DSCF1340.jpg Works well for ...

Just a thought, i may be wrong, but ain't the rears 2.5 inchs wide ? Zukes are 2" Anyway, if 2.5" LR series 3 front paras chopped would do it. Cheap as chips too. I think most would say extended shackles don't matter too much on the back, but your springs will suffer. Don't forget the bump stop exte...

Further to Dunks post, Beaver Panels, i have used them and the service was great!

http://www.beeversautopanels.co.uk/

The extra wire is used to exite the coils in some alt's

Think its the yellow/something wire that does the dash light.
Just connect them one at a time to 12v with the ignition on, see which one turns the light off.

You know it makes sence with the pulley

What he said above, plus the vit one has a higher output.
Should get top dollar for the 1300 one on the bay.

Nice to see BigStu's truck at the top.
Apparently he and Shane (both Granite Bashers) came 1st in class.

Dunno if you have bought yet, i only just found this post. I have a Portamig 185 on a 13a supply and it works just fine, no flickering/burning/fires. It's a great machine, i tried out plenty and this came tops. 20 amp range is the muts nuts for thin and rusted stuff 1 pass 6mm, not a problem No bell...

I made this one bolted on. Bolts through the 4 holes, with re-enforcement and billets and around the chassis tube. http://i268.photobucket.com/albums/jj37/russy196/DSCF1263.jpg I have pulled out alsorts with it, no movement in the mountings at all. The bumper has been off the front now three times, ...

Yep, and after them escapades



New clutch required

Oh dear

39 first time
29 2nd

I suppose at 39 that's to be expected. Takes me a while to catch on

Gone up for me this year, must be the amount of SJ thiefts.

Was £102 pa now £171 with Flux.
But i probably have the lowest band postcode.

Look ok Andy as you say. However have a close look at the near side shackle. Missus bent the axle before that mud hole. She hit a tree stump bless er! http://i268.photobucket.com/albums/jj37/russy196/Green%20SJ%20Van/DSCF1348.jpg Bit of an SJ addict as you can see. http://i268.photobucket.com/albums...

Quick line to say, "Hello All"
Looks to be a great forum. Nice to see some familiar faces (names)

Bit late in the day guys, but.. In my opinion the new Muddy Bottom site ain't that great. It consists mainly of machine dug holes. One wooded section is ok, very deep water though! Far end steam crossing is fun, as long as you like repair bills :shock: The site is getting more and more established, ...